Ski preparation machine SKI FORM JENEX V2 USA

Machine profile for ski preparation SKI FORM JENEX V2 USA. 

A unique lightweight universal ski machine for processing cross-country skis. The weight of the SKI FORM machine for the WORLD CUP is only 1600 grams.

Designed for skis with a length from 140cm to 212cm and a width from 40 to 100 mm. 

The material of the SKI FORM machine is lightweight annoded aluminum and stainless steel. Skis can be fixed in both directions without turning the profile. Great for small service rooms.

The machine setup time is 20 seconds.

It is very convenient both for trips and for stationary use.

It is possible to handle skis from 140 to 212 cm.

THE WEIGHT OF THE JENEX V2 PROFILE MACHINE for the World Cup is 1 kg 600 grams.

Mounting clamps are not included.

SPECIFICATIONS

Compressed Length: 117 cm (46 inches) Extended Length: 212 cm.

Weight: 1600 grams (3.5 pounds)

Ski Sizes: Skis from 140 to 212 cm long, 40 mm wide to 100+ mm wide. 

Materials: Anodized aluminum and stainless steel. The tops of the ski forms have solid rubber high friction surfaces.

Construction: The high strength U shaped aluminum ski forms and the binding gripper slide in dual side channels on the rugged aluminum base frame. The same frame used in V2-XL900 roller ski shafts.
 
Adjustment time: 20 seconds. We have made some time studies of how long it takes to remove a ski from the form and install a new ski that is of a different size and after some practice the average time was about 20 seconds. If you are going from a very long to a very short ski, it can still be accomplished in under 30 seconds.

Mounting the Ski Form to a table: Two standard C clamps hold the aluminum extruded base unit to a bench or ski table. The clamps never have to be moved as they stay in the same position for skis from 212 to 140 cm.

Binding Gripper: The gripper engages the triangular steel loops that can be pre mounted to the binding. The gripper is designed so it slides on the frame and engages the steel loop and securely locks the ski. The sliding gripper has vertical adjustment via a threaded stud. Adjustment is easy and rapid as can be seen in the Video. 
(Patents Pending) 

Видео станка-профиля JENEX V2 SKI FORM http://www.youtube.com/watch?v=FxO6fXdhANY&noredirect=1